Author Topic: D'Addario 2 way humidipack, clip missing? and other questions  (Read 775 times)

simonpyman

  • New Member
  • *
  • Posts: 30
D'Addario 2 way humidipack, clip missing? and other questions
« on: October 03, 2016, 02:09:08 PM »
As a follow up to my earlier enquiry about this system, I opened it the other day to give it a try but noticed that the clip that holds the pack over the strings in the sound hole is missing... or is it? Did I get a box without the clip? wanted to ask if this was the case before I take it back to the guitar store... seems strange that it would be missing the clip yet the box only mentions 3 humidipacks and 2 holders (1 for headstock and 1 for the soundhole)... another question is that the soundhole holder is supposed to hold 2 packs but there is no way that that will fit between the strings... am I missing something or should I look for a different brand/system?
Acoustic:
2015 Taylor 324 hog top
2011 Custom Martin Jumbo (J-35E) made for Norman's Rare Guitars
Electric:
1982 Yamaha SG-1500
1988 Washburn HB-35

timfitz63

  • Veteran Member
  • *****
  • Posts: 3083
  • Getting better one strum at a time...
Re: D'Addario 2 way humidipack, clip missing? and other questions
« Reply #1 on: October 03, 2016, 09:57:27 PM »
Difficult to say from your description which Humidipak version you got.  The older style did not have a 'dowel-and-clip' single pouch that holds two of the Humidipaks inside the sound hole; instead it had (what I call) saddlebags -- two joined pouches that straddled all of the strings.  The older saddlebag design was better for acoustic guitars, I think.

If you have the newer version (two separate pouches as opposed to a single pouch with a 'saddlebag' pouch), it sounds like it didn't get packed properly with all of the necessary bits.  If you still want to give the Humidipak system a try (and it does work well), you'll need to exchange the one you have for one that's fully equipped.  The 'dowel-and-clip' pouch will go down through the strings, but you might have to spread them a bit in order to get it to pass down into the sound hole.
DN: 360e, 510ce, 510e-FLTD, 810ce-LTD (Braz RW), PS10ce
GA: 414ce, 614ce-LTD, 714ce-FLTD, BR-V, BTO (Makore, 'Wild Grain' RW, Blkwood), GAce-FLTD, K24ce, PS14ce (Coco, Braz RW, "Milagro"), W14ce-LTD
GC: 812ce-LTD TF, BTO TF ('Sinker'/Walnut, Engelmann/"Milagro"), LTG #400
GO: 718e-FLTD, BTO (Taz Myrtle)
GS: Custom 516e, BTO 12's (Taz Tiger Myrtle, 'Crazy' RW), 556ce, 656ce, K66ce, PS56ce ("Milagro")
GS Mini 2012 Spring LTD (Blackwood)
T3/B: Custom (Cu & Au Sparkle)
T5: C1, C5-12, S (Aztec Gold)

Frettingflyer

  • Veteran Member
  • *****
  • Posts: 1383
Re: D'Addario 2 way humidipack, clip missing? and other questions
« Reply #2 on: October 05, 2016, 03:42:20 PM »
Simon, it sounds like you were given an incomplete package. That said, you can now get them without the "clip" in the old style. I just signed on to start a thread on the subject.
http://www.unofficialtaylorguitarforum.com/index.php?topic=7611.0
May be worth an exchange?
Dave
2014 Koa GS Mini-e FLTD (for the wife)
2004 314ce,
2014 custom GC Coco/Euro spruce
2015 Wildwood 812ce 12 fret
2016 522ce 12 fret
2019 K24ce BE
2021 322e
2017 Blackbird Lucky 13
2019 Mcpherson Sable